Melt blown non woven fabric complete production line

Melt blown non woven fabric complete production line

Melt blown non woven fabric takes polypropylene as the main raw material, and the fiber diameter can reach 2-8 microns. These ultra-fine fibers with unique capillary structure increase the number and surface area of fibers per unit area, so that the melt blown fabric has good filtration, shielding, heat insulation and oil absorption, which can be used for air and liquid filtering materials, isolation materials, absorption materials, m**k materials Thermal materials and wipes and other fields.


Section storage tank → air conveying device → screw extrusion melting → filtration → metering → die head → spinneret (hot air) → laying mesh → electrostatic electret → finished product.

0.00
0.00
  
Product Description

Melt blown non woven fabric takes polypropylene as the main raw material, and the fiber diameter can reach 2-8 microns. These ultra-fine fibers with unique capillary structure increase the number and surface area of fibers per unit area, so that the melt blown fabric has good filtration, shielding, heat insulation and oil absorption, which can be used for air and liquid filtering materials, isolation materials, absorption materials, m**k materials Thermal materials and wipes and other fields.


Section storage tank → air conveying device → screw extrusion melting → filtration → metering → die head → spinneret (hot air) → laying mesh → electrostatic electret → finished product.

Model

JX-MB-NWF-001

JX-MB-NWF--002

JX-SM- MBNF -003

Fabric Width

1600mm

2400mm

3200mm

Filament number

2~8μm

2~8μm

2~8μm

Principal raw
material

Polypropylene chip MFI: 800～1500

Polypropylene chip MFI: 800～1500

Polypropylene chip MFI: 800～1500

Uniformity

CV≤8%

CV≤8%

CV≤8%

Max capacity

1.5t/24h

2.5t/24h

3.5t24h

Gram weight

20～100g/㎡

20～100g/㎡

20～100g/㎡

Rroduction
speed

≤ 100m/min

≤ 100m/min

≤ 100m/min



Section storage tank → air conveying device → screw extrusion melting → filtration → metering → die head → spinneret (hot air) → laying mesh → electrostatic electret → finished product.